Enoch "suit automatic one ironing machine" came out

This machine is the most advanced garment ironing special equipment pioneered by Anshan Yinuo Garment Machinery Co., Ltd. in the past nine years. It has more than a dozen independent innovation patenting technology, and it is the first to develop a suit in the world. The three-position integrated machine's three-dimensional pressing technology is the first in the world to develop an adjustable two-dimensional tensioning technology under the two-dimensional tension, and the ironing technology of the two integrated into one machine; The new concept of three-dimensional pressing of the shoulders, collars and chest thick parts under the tension tension and the three-position pressing of the body and the thin part of the sleeve under the adjustable two-dimensional tension tightness And new methods. The machine is composed of lifting mechanism, angle adjustment mechanism, upper mold, lower mold, work table, air duct column, frame support, heater, press clamp, sleeve clamp, steam system, air blowing system, dehumidification system, pneumatic system. The control system is characterized in that the underside of the cantilever bracket of the lifting mechanism is connected with a tilting displacement mechanism, the upper mold is suspended in the angle adjusting displacement mechanism, the upper mold has a heater, and the upper mold can spray steam and dehumidify. The air duct column is connected to the lower part of the lower mold, passes through the workbench, and the lower part thereof is fixed on the base. The lower mold has two left and right displacement shoulder models; the work table has a guide rail; the guide rail has a displacementable clothespin. ; a sleeve that is attached to the table by adjusting the bracket; a sleeved pneumatic dilator.

The driving device of the machine is completed by a pneumatic automatic control system. The vacuum pump and the dehumidifying valve constitute a suction system; the fan, the reversing valve and the hot and cold air duct constitute a blowing system, and the steam is composed of a heater, a solenoid valve and a steam trap. Heating and injection system. The automatic control system consists of the measuring and controlling component, the electric board, the microcomputer or the RLC, the foot switch and the manipulator interface.

The machine is easy to operate, only need to set the pressure, tension and time variable parameters according to the model, style and fabric properties of the suit. Set the shoulder model position of the lower die according to the shoulder width of the suit, and adjust according to the length of the suit. The height of the table, the operation of the clothespin and the sleeve system by the footstep control switch, the clamping of the body and the sleeve of the suit, the axial and radial tension, the placement of the sleeve expander, and the pressing of the start button by both hands. The computer automatically performs the automatic control of all the processes, namely the upper die: the collar - the shoulders - the pressure - the chest - the steam - the dehumidification. At the same time, the lower mold is: blowing hot air - spraying steam - steam heating the wind - blowing cold air. When the process is finished, all pressure, clamping and tension are automatically released and restored to the initial state. The process of the upper and lower molds can be carried out independently.

The machine's original model of the lower shoulder model can be automatically displaced and can withstand high pressure. The shoulder model is synchronously displaced according to the shoulder angle, and the uniform speed can be adjusted. It has a fully automatic control system for positioning and resetting without any point. It can be adapted to different models. And the style of the suit shoulder width, through the shoulders of different shoulders of different telescopic positions, to achieve the compression of the collar and shoulders, to ensure that the shoulders have no leakage; the vertical die under the upper die, the pressure is greater than the current collar press Double and adjustable; vertical compression design with parallel displacement of adjustable angle of upper mold, firm structure, higher pressure than all current two-station and three-station presses.

The pressing angle of the upper model to the chest and the collar of the suit can be adjusted according to the position of the suit button. Because the machine clamps and pulls down the hem of the suit, so that the thicker parts of the shoulders, collar and chest achieve the tension of the fabric, so there is no drag on the four stations. Its pressing quality is better than the part pressing machine, the two station pressing machine and the three station pressing machine.

The machine clamps and expands the hem of the suit by the adjustable clothespin fixed on the workbench and the automatic external expansion of the clothespin to achieve the radial tension of the body; the unique workbench Automatic pull-down and reset control system for adjustable tension and pull-down tension in the axial direction of the body. The workbench is designed for adjustable height position, and the adjustment work surface is consistent with the height of the clothes hem, reducing the pressure drop and energy loss of steam and hot air leakage, increasing wind pressure and shortening time.

The lifting method of the machine table overcomes the problem caused by the rise of the hanger model to achieve the pull-down tension of the body, that is, the position of the cuffs of different lengths is determined by the rise of the model, so that the cuffs cannot be aligned and clamped and pulled down.

The machine's independently adjustable sleeve 3D adjustment structure allows the sleeve to clamp the cuffs at any position and angle. The sleeves are pulled down with the table to achieve the axial pull-down tension of the sleeves. The machine is uniquely pneumatic. The sleeve expander can be placed in the sleeve to make the front and rear of the sleeve uniform and the upper and lower force uniform, so that the adjustable tension of the sleeve can be adjusted, so the machine is subject to the body and sleeve of the suit. Under the two-dimensional tension adjustable, the inner and outer blowing process is carried out, that is, the third-dimensional tension perpendicular to the fabric is realized, and the three-dimensional ironing quality is higher, which is the most advanced three-dimensional ironing technology in the world.

The machine has many functions, which can independently complete the three-dimensional ironing of suits of different models, styles and fabrics. Through the foot setting switch, the shoulder width position of the lower die is set, and the radial and axial directions are clamped by the pedal sequence switch. The tension control operation quickly and simply completes the two-dimensional tension tightening of the ironing process. Fully automatic microcomputer (or PLC) control system for fast and stable automatic control throughout the entire process. With 100 free programming options, the machine is suitable for suits with a shoulder width of 470-520mm and a length of 700-1050mm. The high-quality ironing of the suit can be completed in about 1 minute, and the integrated machine can replace the functions of multiple sub-section presses to achieve 550 pieces / 10 hours of high-quality pressing. The machine saves labor and labor, requires only one person to operate, less equipment investment, high cost performance, low energy consumption, and further reduced use costs.

The machine not only meets the high-quality ironing requirements of large and medium-sized suits; it is also suitable for high-level suit cutting centers; and the pre-sales of the suits and stores for the ironing and the after-sales customers. The best ironing equipment for hotels, hotels and dry cleaners in the washing industry is the best matching ironing equipment for the international advanced garment enterprises to achieve the custom revolution.